Question: How Much Water Sealer Do I Need?

Is Thompson Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color.

Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements.

I used my spray gun to apply, and a little goes a long way.

Obviously, you can use a brush to apply it as well..

What is the longest lasting deck sealer?

1. BEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. SEAL-ONCE MARINE Penetrating Wood Sealer is a clear water-based sealer, but it provides the protection you’d expect from an oil-based stain, penetrating right down into the wood fibers for long-lasting protection against moisture damage and mold growth.

Can I paint over Thompsons Water Seal?

Officially, the Thompson’s website advises against painting over any of their water seals. The company notes that the hydrophobic nature of the product could potentially cause the paint to bead up or not even “catch” on the wood.

How do I calculate how much stain I need?

Before staining a deck you need to figure out the deck’s total square footage. Once this calculation is considered, you can figure out how many gallons of deck stain you need by reading the coverage rate of the stain you are buying. On average most deck stains cover 150-300 sq. ft.

How many sq ft does a 5 gallon bucket of paint cover?

1,800 square feetAccording to our paint estimator, 5 gallons of paint can cover as much as 1,800 square feet. A quart of paint will coat about 90 square feet of space.

How long does Thompson Water Seal take to dry?

2 hoursCoverage will vary depending on the texture and porosity of the surface to being treated. DRYING TIME Thompson’s Water Seal should be dry in 2 hours under normal conditions. Dry times depend on the texture & type of surface you’re coating. Remove as much product as possible from equipment before cleaning.

What temperature do you apply Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application. Perform the splash test. Sprinkle water on various sections of surface to be sealed.

Can you thin Thompson’s water sealer?

Herein, can you thin Thompson Water Seal? The old-timer came up with a similar formula in 3 parts linseed oil, 2 parts Thompson’s Water Seal cut with 1 part paint thinner. The paint thinner acts as a penetrating agent, making the mixture thin enough so that the active ingredients penetrate the wood.

Does Thompsons Water Seal go bad?

Acrylic- and latex-based sealer are both water-based. Similar to paint in its consistency and shelf life, if stored in a cool, dry place, it should last approximately five years.

What colors does Thompson Water Seal come in?

The new Thompson’s WaterSeal Waterproofing Stain is available 5 popular colors: Woodland Cedar, Sequoia Red, Maple Brown, Harvest Gold and Acorn.

How do I dispose of Thompson Water Seal?

Open them and let them completely dry out over a few weeks outside. Then, you can just properly put them in the regular trash…that’s the instructed protocol for any paint or sealer around me.

How much does a 5 gallon bucket of stain cover?

For example, if you have 1,000 square feet of fence and the stain says that 1 gallon covers 200 square feet, you would divide 1,000 by 200, which equals 5 gallons to cover the fence. If you get a fraction in your answer, always round up to the next whole gallon.

How many square feet does Thompson Water Seal cover?

That determines how many gallons of stain are required (each gallon covers up to 400 square feet). You can buy it and be on your way. Thanks to its pigment-suspension technology, there’s no need to wait for the Waterpoofing Stain to have its turn in the paint shaker.

What is the best way to apply Thompson’s Water sealer?

Apply by brush, roller, dipping, or sprayer. A garden “pump-up” style sprayer is the simplest method. If over applied, remove excess before it dries by redistributing to dry areas or wiping off.

How much will 8 oz of stain cover?

Product Overview. Easy to use wood finish covers up to 70 sq. ft. per 8 oz.

When can you walk on Thompson Water Seal?

Now that you’ve applied Thompson’s Water Seal following the instructions above, to your entire surface, you can walk away and let it dry for 24 hours. That’s all the time you need to let Thompson’s Water Seal work to protect your outdoor surfaces from water damage.

Can you put Thompson’s Water Seal on wet wood?

Thompson’s® WaterSeal® Waterproofing Stains can be applied to damp wood, so you only have to wait about two hours to begin applying stain. Some of our other products require that the wood dry for 48 hours before applying a deck coating.

How many coats of Thompson Water Seal do I need?

2 coatsshake the can vigorously before use. Thompson’s Water seal has a slightly milky appearence in the can,but clears quickly upon application. For best results ensure the surface is as dry as possible. Apply 2 coats using brush,roller or sprayer.

Does Thompson Water Seal need two coats?

Thompson’s WaterSeal products typically need only one application, but you can apply a second coat of stain to darken the wood, if desired. However, you must wait for the first coat to dry (typically about 2 hours) and apply the second coat within 4 hours of applying the first coat.

How long is Thompson’s Water Seal good for?

10 yearsIf applied correctly, Water Seal will last up to 10 years. This is dependent on conditions such as orientation of the wall and local climate.

What happens if it rains after applying Thompson’s Water Seal?

Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable.

What is the best way to apply deck sealer?

Apply the deck sealer with a natural bristle brush. A roller is faster, but brushing helps force the sealer into open pores and grain. Make sure to get the sealer into joints where two boards butt together. Apply the deck sealer to three or four boards at once, working their entire length.

Is it better to stain or seal a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

What does Thompson’s Water Seal do?

Thompson’s® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson’s® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.

What is the difference between concrete sealer and Waterproofer?

One of the differences between a concrete sealer and a concrete waterproofer (sometimes called penetrating sealer) is that a sealer will form a protective layer over the surface while a waterproofer will penetrate down into the pours of the concrete and the protective layer will form there.